CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Gmsh] Physical surfaces not turning into patches

Register Blogs Community New Posts Updated Threads Search

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old   April 25, 2023, 13:42
Default Physical surfaces not turning into patches
  #1
New Member
 
loriro
Join Date: Apr 2023
Posts: 2
Rep Power: 0
lorirosanp is on a distinguished road
I am trying to perform a flat plate with a compression corner of a certain angle, mesh looks great but when using the command gmshToFoam, I get no patches at all:

Skipping tag at line 50423
Patch 0 gets name patch0

--> FOAM Warning :
From function Foam:olyMesh:olyMesh(const Foam::IOobject&, Foam:ointField&&, const cellShapeList&, const faceListList&, const wordList&, const wordList&, const Foam::word&, const Foam::word&, const wordList&, bool)
in file meshes/polyMesh/polyMeshFromShapeMesh.C at line 595
Found 19798 undefined faces in mesh; adding to default patch.
Finding faces of patch 0

FaceZones:
Zone Size
0 99


I post my script down here so you can help me with any mistake:
// Gmsh project created on Tue Apr 25 14:22:36 2023
SetFactory("OpenCASCADE");

//POINTS
Point(1) = {0, 0, 0, 1.0};
Point(2) = {3, 0, 0, 1.0};
Point(3) = {10, 3.26415, 0, 1.0};
Point(4) = {10, 10, 0, 1.0};
Point(5) = {3, 10, 0, 1.0};
Point(6) = {0, 10, 0, 1.0};

//LineS
Line(1) = {1, 2};Transfinite Curve {1} = 30 Using Progression 1;
Line(2) = {2, 3};Transfinite Curve {2} = 70 Using Progression 1.025;
Line(3) = {3, 4};Transfinite Curve {3} = 100 Using Progression 1;
Line(4) = {4, 5};Transfinite Curve {4} = 70 Using Progression 0.975;
Line(5) = {5, 6};Transfinite Curve {5} = 30 Using Progression 1;
Line(6) = {6, 1};Transfinite Curve {6} = 100 Using Progression 1;
Line(7) = {5, 2};Transfinite Curve {7} = 100 Using Progression 1;

//SURFACES
Curve Loop(1) = {5, 6, 1, -7};
Plane Surface(1) = {1};
Curve Loop(2) = {4, 7, 2, 3};
Plane Surface(2) = {2};
Transfinite Surface {1};
Transfinite Surface {2};//+
Recombine Surface {1, 2};
//+
Extrude {0, 0, 1} {
Surface{1}; Surface{2}; Layers {1}; Recombine;
}
//+
Physical Volume("fluid", 21) = {1, 2};
//+
Physical Surface("inlet", 22) = {4};
//+
Physical Surface("outlet", 23) = {10};
//+
Physical Surface("top", 24) = {8, 3};
//+
Physical Surface("bottom", 25) = {9, 5};
//+
Physical Surface("sides", 26) = {2, 1, 7, 11};
Attached Files
File Type: txt compressioncorner.txt (1.3 KB, 0 views)
lorirosanp is offline   Reply With Quote

 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] [cfMesh] Error when creating AMI patches propeller gabrielfelix OpenFOAM Community Contributions 2 July 5, 2023 21:54
FOAM FATAL ERROR: Unable to find initial target face ht2017 OpenFOAM Pre-Processing 0 October 27, 2020 12:06
Turning on Hyperthreading for meshing and setting only physical cores for simulation AidealZohary Main CFD Forum 6 October 23, 2019 09:49
Regarding periodic BC in ICEM generated grid Tarak OpenFOAM 32 April 30, 2013 15:46
Can sample work on internal surfaces which are not patches? sega OpenFOAM Post-Processing 0 July 10, 2009 08:19


All times are GMT -4. The time now is 19:29.