|
[Sponsors] |
[snappyHexMesh] One instance of trisurface for all runs |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 25, 2023, 08:40 |
One instance of trisurface for all runs
|
#1 |
New Member
Kate Bradbrook
Join Date: Nov 2015
Posts: 12
Rep Power: 10 |
My .stl files are often quite large. In making copies of run folders (e.g. for different boundary conditions, mesh tests etc) I end up with lots of copies of these files which leads to unnecessary data storage.
So I wish that SHM would let me put a path in file name reference, e.g. "../trisurface/MIT_RiverBed.stl" {type triSurfaceMesh; name wall_1;} BUT it then ignores .stl file and if I use similar path for eMesh it gives error that .eMesh file can't be found. (NB. I tried no "" and single ' around filename too) If there is a way, please let me know, if not and any developers see this, please incorporate!! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OpenFOAM on AWS Ubuntu EC2 Instance | mcc12 | OpenFOAM Programming & Development | 1 | October 28, 2021 13:22 |
SU2-7.0.1 on ubuntu 18.04 | hyunko | SU2 Installation | 7 | March 16, 2020 04:37 |
how to merge two separate triSurface | mikeP | OpenFOAM Programming & Development | 2 | June 26, 2017 12:06 |
terminate called after throwing an instance of 'int' | b614910 | SU2 | 10 | July 27, 2014 22:16 |
Can't get convergence on SU2_CFD runs | lcthompson | SU2 | 3 | December 11, 2013 09:43 |