CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Salome] zero area patch created after extrudemesh

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 17, 2023, 04:32
Default zero area patch created after extrudemesh
  #1
Member
 
Song Young Ik
Join Date: Apr 2022
Location: South Korea
Posts: 59
Rep Power: 4
songyi719 is on a distinguished road
I created quasi-2D single cell thickness mesh using salome, and used extrudemesh to create axisymmetric 5 degree mesh

My initial goal was to create it directly from salome, but since unv format can't handle such polyhedral cells inside it, I moved created med file to gmsh and converted again using gmshtofoam, however it couldn't convert it properly since such 'could not match gmsh face' error occured.

Whatever, I exported quasi-2D mesh using unv and used ideaunvtofoam and extrudemesh, and I got wedge mesh

But after that, I got some patch that is invisible from paraview, but still contains 1000 faces which was exact # of faces which was face containing rotating axis at quasi-2D mesh.

How should I deal with this infinitesimal patch? Is it ok to just leave it alone? Or should I do something to remove it?
songyi719 is offline   Reply With Quote

Reply

Tags
extrudemesh, patch, wedge


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Compressor Simulation using rhoPimpleDyMFoam Jetfire OpenFOAM Running, Solving & CFD 107 December 9, 2014 14:38
createPatch Segmentation Fault (CORE DUMPED) sam.ho OpenFOAM Pre-Processing 2 April 21, 2014 03:01
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam) cfdonline2mohsen OpenFOAM 3 October 21, 2013 10:28
[Commercial meshers] Using starToFoam clo OpenFOAM Meshing & Mesh Conversion 33 September 26, 2012 05:04
OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3 flakid OpenFOAM Installation 16 December 28, 2010 09:48


All times are GMT -4. The time now is 19:36.