|
[Sponsors] |
[snappyHexMesh] stl and snappyHexMesh dimensions mismatch |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 6, 2009, 04:00 |
stl and snappyHexMesh dimensions mismatch
|
#1 |
Senior Member
Roman Thiele
Join Date: Aug 2009
Location: Eindhoven, NL
Posts: 374
Rep Power: 20 |
Hej,
I have a problem with the stl fileformat and the snappyHexMesh tool. The dimensions in the stl file format are as always given in mm, because all 3D cad programs (SolidEdge V20 in my case) export the original ISO dimensions. The problem now is that snappyHexMesh uses m as input, is there any way to define a scaling factor for snappyHexMesh? |
|
Tags |
dimension, snappyhexmesh, stl, units |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh is not using the stl file | a_habib | OpenFOAM Meshing & Mesh Conversion | 9 | June 12, 2020 17:36 |
[CAD formats] Creating waterproof STL using snappyHexMesh or salome | Tobi | OpenFOAM Meshing & Mesh Conversion | 58 | May 13, 2020 06:01 |
[snappyHexMesh] What types of stl files are needed in snappyhexmesh? | phandy | OpenFOAM Meshing & Mesh Conversion | 1 | February 19, 2015 05:36 |
[snappyHexMesh] Experimentally obtained STL file for internal Flow SnappyHexMesh | Irish09 | OpenFOAM Meshing & Mesh Conversion | 9 | April 7, 2012 08:50 |
[snappyHexMesh] Patch Names in STL file for snappyHexMesh | Kattie | OpenFOAM Meshing & Mesh Conversion | 11 | October 18, 2011 11:05 |