|
[Sponsors] |
[snappyHexMesh] snappyHexMesh and boundary conditions |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 18, 2009, 12:54 |
snappyHexMesh and boundary conditions
|
#1 |
Member
James Baker
Join Date: Dec 2009
Posts: 35
Rep Power: 16 |
First and foremost, I am new to OpenFOAM, so this may be a silly question or one that has been brought up before. However, I am attempting to run a 2D nozzle problem and have a question on how to get empty on the front and back with snappyHexMesh. As I understand it boundary conditions are applied to patches, so if I apply a BC to the surface of an STL file that is smaller than the bounding box, it would be a 3D BC on the entire surface? I tried making the bounding box thinner than the STL file in the z direction, but came up with an error when trying to run SonicFoam about it not being 1D or 2D because the empty faces weren't divisible by the cells (or something to that effect). If anyone could shed some light on this It would be appreciated!
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMEsh, boundary conditions, STL, failed solver | claudeZHAW | OpenFOAM Meshing & Mesh Conversion | 1 | November 25, 2017 05:26 |
[snappyHexMesh] snappyHexMesh Boundary Conditions | Cyberholmes | OpenFOAM Meshing & Mesh Conversion | 10 | July 10, 2017 21:05 |
Entrainment boundary conditions in a natural convection model | emat | OpenFOAM Running, Solving & CFD | 1 | March 28, 2017 08:37 |
Boundary conditions definition using uniformFixedValue | SF_ | OpenFOAM Pre-Processing | 0 | October 14, 2015 21:06 |
[Other] Internal Boundary with different boundary conditions | ripudaman | OpenFOAM Meshing & Mesh Conversion | 0 | August 23, 2013 18:48 |