|
[Sponsors] |
February 19, 2010, 07:35 |
2D Mesh-Refinement
|
#1 |
New Member
Michael Harrer
Join Date: Jul 2009
Posts: 3
Rep Power: 16 |
Hello foamers,
Im working with the dynamic mesh refinement known from i.e. the dambreak-case (dynamicRefineFvMesh.C) and everything works fine as long as i create a 3D-case. I want to simulate a 2D-case with "empty"-type boundaries, but when i do so it wont work, because the count of cells is not equal to the count of faces (seems to be the restriction for 2D-cases). So i would like to refine the cells just in the xy-plane to solve my problem. Is there a simple method to do so? Best regards, Michael |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh sticking point | natty_king | OpenFOAM Meshing & Mesh Conversion | 11 | February 20, 2024 09:12 |
y+ = 1 boundary layer mesh with snappyHexMesh | Arzed23 | OpenFOAM Running, Solving & CFD | 6 | November 23, 2022 15:15 |
[snappyHexMesh] Edge Refinement | fracasce | OpenFOAM Meshing & Mesh Conversion | 3 | December 2, 2017 13:30 |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
[snappyHexMesh] problems using snappyHexMesh 2.1.0 on a supercomputer | Sunxing | OpenFOAM Meshing & Mesh Conversion | 9 | September 20, 2014 09:30 |