|
[Sponsors] |
[Commercial meshers] Cannot convert fluent or tgrid hexcore mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 22, 2010, 00:51 |
Cannot convert fluent or tgrid hexcore mesh
|
#1 | ||||
Member
Join Date: Mar 2009
Posts: 90
Rep Power: 17 |
Hey all,
I typically export ANSA meshes to FOAM directly but in this case I want to convert a fluent hexcore case. It was generated in tgrid and converted to polyhedra and then sent to fluent. The mesh has tets and prisms, and all the wall cells are tria. I was able to convert pure tet meshes and tet+prism meshes, so I have narrowed it down to the hexcore being the issue. I have tried the following: Wrote out tgrid mesh as polyhedra to .msh Wrote out tgrid mesh NOT as polyhedra to .msh Wrote out tgrid mesh as polyhedra to .cas Wrote out tgrid mesh NOT as polyhedra to .cas Using fluent3DMeshToFoam as suggested here I got the following error: http://www.cfd-online.com/Forums/ope...al-meshes.html Quote:
Quote:
Quote:
Quote:
|
|||||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] COnvert FLuent MEsh to openfoam with interface | manuc | OpenFOAM Meshing & Mesh Conversion | 1 | July 25, 2017 03:13 |
[ICEM] Missing face error from FLUENT even after repairing mesh + other questions | unknown159 | ANSYS Meshing & Geometry | 0 | July 5, 2013 20:18 |
[Commercial meshers] how can convert a blockMeshDict file into a mesh for Fluent? | immortality | OpenFOAM Meshing & Mesh Conversion | 7 | April 17, 2013 07:30 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
High Skewness in Hexcore Mesh/ Tgrid | xaero | Main CFD Forum | 4 | November 10, 2009 11:04 |