[Gaspacho]

Dear all ,

I was doing the oppositeBurningPanels tutorial provided with the combustion solver fireFoam. In parallel with 6 cores, there is no reconstructPar command in the Allrun script so at the end of the simulation , I couldn't post-process my data. Then I have tried , to use reconstructPar without option and I got some error message , I also have tried with the option - region panelRegion as this tutorial creates an other region in the domain but it did not work. Did someone meet this issue and find a way to solve it ?

Thank you in advance !

[T.D.]

Hi,

You should define well your number of procs. that must be the same
in system/decomposeParDict and /panelRegion/decomposeParDict and in Allrun file. This also must be compatible with the decomposition of domain by the definition of n ( ) in the decomposeParDict file.

If did not work. You can try chech and post back your log. files contents, such as the:
log.decomposePar.log
log.decomposeParPanelRegion.log
etc...


Good Luck
Regards,

T.D.

Originally Posted by Gaspacho

Dear all ,

I was doing the oppositeBurningPanels tutorial provided with the combustion solver fireFoam. In parallel with 6 cores, there is no reconstructPar command in the Allrun script so at the end of the simulation , I couldn't post-process my data. Then I have tried , to use reconstructPar without option and I got some error message , I also have tried with the option - region panelRegion as this tutorial creates an other region in the domain but it did not work. Did someone meet this issue and find a way to solve it ?

Thank you in advance !

[kindle]

Hi, I have tried this tuto to test refineMesh. I got at the first time "reconstructPar error" indicating I am missing file G in processor4. Strange.

But then I use ./Allrun instead of typing every line in Allrun. I got it right and there are error when I open with paraview (not a severe error).