|
[Sponsors] |
how to use buoyancy pressure boundary condition? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 18, 2012, 09:47 |
how to use buoyancy pressure boundary condition?
|
#1 |
New Member
Join Date: Mar 2012
Posts: 20
Rep Power: 14 |
Hello, i finished a case "floatingobject", and there some problems. Firstly, it's choosen buoyancypressure boundary condition for p or p_rgh on tank and floatingobject. I don`t understand why buoyancypressure is choosen, and for a further step, please describe the situation that the bc is used to.
secondly, i change some conditions: water is static, tank' size is infinite and floatingobject is forced to oscillate. For this situation, is it right that buoyancypressure is still applied to tank and floatingbox? Thanks. |
|
Tags |
buoyancypressure |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
domain imbalance for enrgy equation | happy | CFX | 14 | September 6, 2012 01:54 |
Boundary Conditions : Total Pressure or Velocity | Gearb0x | OpenFOAM Running, Solving & CFD | 2 | February 28, 2011 21:18 |
Proper Pressure Boundary Conditions for Buoyant Flow | mchurchf | OpenFOAM | 0 | March 25, 2010 12:16 |
what the result is negatif pressure at inlet | chong chee nan | FLUENT | 0 | December 29, 2001 05:13 |
Hydrostatic pressure in 2-phase flow modeling (CFX4.2) | HB &DS | CFX | 0 | January 9, 2000 13:19 |