|
[Sponsors] |
April 23, 2013, 10:28 |
MapFields seems hanging
|
#1 |
New Member
Join Date: Dec 2012
Posts: 4
Rep Power: 13 |
For a grid convergence study I am trying to map the fields from a coarse mesh to a finer mesh with MapFields. MapFields seems however hanging at the statement:
Code:
Create databases as time Source time: 0 Target time: 0 Create meshes Source mesh size: 366539 Target mesh size: 461702 |
|
May 3, 2013, 05:45 |
|
#2 |
Member
hannes
Join Date: Mar 2013
Posts: 47
Rep Power: 13 |
Hi,
I came across the same problem and was able to narrow it down a little bit. Using blockMesh as mesh generator everything works fine as long as only orthogonal cells are refined. Moreover, as long as I refine the mesh along the direction of one of the coordinate axes everything is fine also for nonorthogonal cells. However, I've got cells in the boundary layer with very high aspect ratios (~600) and I would like to refine the mesh in the direction of the wall (which is inclined) and that does not work anymore. I also tried to use mapFields with the option -mapMethod mapNearest in order to overcome any potential problem with the interpolation but it still does not work. Anybody any idea? Best regards Hannes |
|
June 2, 2014, 17:19 |
|
#3 |
New Member
Jason Pearl
Join Date: Jul 2013
Location: Burlington
Posts: 10
Rep Power: 12 |
I've been having issues with OF230 mapfields command as well,
it meshes and the fields look absolutes fine but I end up getting errors when I run the solver, are you saying that your will not even finish the mapfields proceedure? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issues with mapFields | BlackBoatNavArch | OpenFOAM Pre-Processing | 38 | May 28, 2021 16:29 |
implementation of mapFields into parallel transient case | simpomann | OpenFOAM Pre-Processing | 4 | August 2, 2016 04:41 |
mapFields doesn't change fields | Werne | OpenFOAM | 6 | July 30, 2016 12:45 |
mapFields problem | martyn88 | OpenFOAM | 1 | November 8, 2012 13:42 |
transientSimpleDyMFoam, mapFields and decomposePar | pad | OpenFOAM Running, Solving & CFD | 0 | December 3, 2010 05:22 |