pyFoamClearBoundaryValue.py with vectors

Carlo_P · August 20, 2019, 06:21

Hey,
I found lots of interesting utilities called pyFoam...

One of this (pyFoamClearBoundaryValue.py ), allows the change of the value in the BC in a very fast way.

For example, if I would like to change the oemga value, I can simply write:

pyFoamClearBoundaryValue.py 0/omega Inlet --value 5

The problem is that I don't know how to manage vetor.

I tried to use

pyFoamClearBoundaryValue.py 0/U Inlet --value 5 0 0
pyFoamClearBoundaryValue.py 0/U Inlet --value (5 0 0)

Any other idea?

Thanks a lot,
Cheers,
Carlo

Carlo_P · August 21, 2019, 09:29

After different test, I found the correct way.

pyFoamClearBoundaryValue.py 0/U Inlet --value "(5 0 0)"

This works!

August 20, 2019, 06:21	pyFoamClearBoundaryValue.py with vectors	#1
Carlo_P Senior Member Carlo_P Join Date: May 2019 Location: Italy Posts: 176 Rep Power: 7	Hey, I found lots of interesting utilities called pyFoam... One of this (pyFoamClearBoundaryValue.py ), allows the change of the value in the BC in a very fast way. For example, if I would like to change the oemga value, I can simply write: pyFoamClearBoundaryValue.py 0/omega Inlet --value 5 The problem is that I don't know how to manage vetor. I tried to use pyFoamClearBoundaryValue.py 0/U Inlet --value 5 0 0 pyFoamClearBoundaryValue.py 0/U Inlet --value (5 0 0) Any other idea? Thanks a lot, Cheers, Carlo

August 21, 2019, 09:29		#2
Carlo_P Senior Member Carlo_P Join Date: May 2019 Location: Italy Posts: 176 Rep Power: 7	After different test, I found the correct way. pyFoamClearBoundaryValue.py 0/U Inlet --value "(5 0 0)" This works! gschaider likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[GAMBIT] Problems with surface vectors orientation when generating mesh with GAMBIT	solalito	ANSYS Meshing & Geometry	0	April 27, 2015 09:57
Can't disply vectors	ghost82	EnSight	5	November 28, 2014 09:36
[General] Glyths plot with cell_data vectors	RicardoGoncalves	ParaView	4	May 19, 2014 13:18
Integration Points and normal area vectors	Bloshchitsyn Vladimir	CFX	0	November 26, 2007 07:35
2 velocity vectors	ashish	CFX	3	June 19, 2007 18:32