|
[Sponsors] |
OF Multiphase: interFoam-replace DTC Hull STL file with wigley hull |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 16, 2020, 15:02 |
OF Multiphase: interFoam-replace DTC Hull STL file with wigley hull
|
#1 |
Member
Tony Zhang
Join Date: Nov 2019
Location: soton
Posts: 45
Rep Power: 6 |
[SIZE="3"][SIZE="3"][SIZE="2"]HI ALL,
Now I am working on interFoam using DTC hull case tutorial. Currently I am trying to replace the DTC HULL with a simpler Wigley hull and then repeat the simulation (RAS-interFoam). DTC hull and Wigley hull are not in the same size and not in same position, I have maneged to make wigley hull in same scaling and same centre position using 3d builder and meshLab, but it appears erros when i conduct surfaceFeatureExtract, which is attached. Does anyone know how to scale this kind of STL file and make it work? Btw, both STL files of DTC Hull and wigley hull are from OF resource. please let me know if you have any hint. Any further discussion will be appreciated! Many thanks Tony |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to calculate mass flow rate on patches and summation of that during the run? | immortality | OpenFOAM Post-Processing | 104 | February 16, 2021 08:46 |
polynomial BC | srv537 | OpenFOAM Pre-Processing | 4 | December 3, 2016 09:07 |
[foam-extend.org] problem when installing foam-extend-1.6 | Thomas pan | OpenFOAM Installation | 7 | September 9, 2015 21:53 |
[OpenFOAM.org] Compile OF 2.3 on Mac OS X .... the patch | gschaider | OpenFOAM Installation | 225 | August 25, 2015 19:43 |
"parabolicVelocity" in OpenFoam 2.1.0 ? | sawyer86 | OpenFOAM Running, Solving & CFD | 21 | February 7, 2012 11:44 |