What's hf in transportProperties

Yupp · July 4, 2022, 03:42

Hello foamers.

I'm using a multiphase solver (interCondensatingEvaporatingFoam). In the transport properties, both gas and liquid have "hf" to be defined.

I searched in the documentation, but only found "Hf" which corresponds to the heat of fusion. I was pretty sure "hf" wasn't "Hf". I tried changing hf in Hf and the simulation crashed, so I'm now sure that it's not the heat of fusion.

I thought it might be the specific enthalpy, but couldn't find anything sure about it.

Anyone have the answer?

TommyLW · October 31, 2022, 05:50

Hello, I don't know if you have already solved this problem.
But since that there is no solution posted, I decide to reply.

The hf means latent heat with unit[J/kg] in interCondensatingEvaporatingFoam cases.
If you want to set latent heat of evaporation to 2256kJ/kg, you can just leave the hf of liquid as 0, and set the value of hf of vapour as 2256e3.

Another forum page related to this issue:
Mass transfer model in interCondensatingEvaporatingFoam

Hope this can help you or others who has the same question.

July 4, 2022, 03:42	What's hf in transportProperties	#1
Yupp New Member Join Date: Jun 2022 Posts: 7 Rep Power: 3	Hello foamers. I'm using a multiphase solver (interCondensatingEvaporatingFoam). In the transport properties, both gas and liquid have "hf" to be defined. I searched in the documentation, but only found "Hf" which corresponds to the heat of fusion. I was pretty sure "hf" wasn't "Hf". I tried changing hf in Hf and the simulation crashed, so I'm now sure that it's not the heat of fusion. I thought it might be the specific enthalpy, but couldn't find anything sure about it. Anyone have the answer?

October 31, 2022, 05:50		#2
TommyLW New Member Jinghan WANG Join Date: Mar 2022 Posts: 2 Rep Power: 0	Hello, I don't know if you have already solved this problem. But since that there is no solution posted, I decide to reply. The hf means latent heat with unit[J/kg] in interCondensatingEvaporatingFoam cases. If you want to set latent heat of evaporation to 2256kJ/kg, you can just leave the hf of liquid as 0, and set the value of hf of vapour as 2256e3. Another forum page related to this issue: Mass transfer model in interCondensatingEvaporatingFoam Hope this can help you or others who has the same question. souza.emer and Yupp like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accessing transportProperties from coded functionObject	Shibi	OpenFOAM Programming & Development	1	April 19, 2021 15:26
How to read multiphase parameters in creatFields from Transportproperties ?	Amirhosseinesh	OpenFOAM Programming & Development	4	October 12, 2018 10:28
Dam break tutorial - transportProperties issue	Guimloute	OpenFOAM Running, Solving & CFD	4	June 27, 2017 11:52
Convert volScalarField to dimensionedScalar to be defined in transportProperties	sabago	OpenFOAM Programming & Development	8	June 1, 2015 12:11
Lookup transportproperties from BC	michielm	OpenFOAM Running, Solving & CFD	4	April 29, 2012 06:48