|
[Sponsors] |
November 6, 2011, 06:07 |
Discretizer - Attaching BCs to surfaces
|
#1 |
New Member
Join Date: Nov 2011
Posts: 1
Rep Power: 0 |
Hi,
I have generated an STL file (ASCII) for use in Discretizer. When read in to Discretizer I'm unable to select surfaces to attach BCs. The part for modelling was created in SolidEdge and the operating system used is Windows 7 using the BlueCFD-1.7 installation. Any help here would be greatly appreciated. Smurf |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to get forces on Iso-Clip Surfaces and How to get forces in cylindrical coordinat | CFD XUE | FLUENT | 3 | March 18, 2015 03:28 |
Dealing with BC's in OF 1.6 | vkrastev | OpenFOAM Running, Solving & CFD | 5 | September 4, 2012 11:58 |
Understanding Code behind BCs | Linse | OpenFOAM Programming & Development | 8 | January 9, 2012 08:58 |
Periodic BCs for flow through body centered cubic | Luigi_ | STAR-CCM+ | 1 | January 26, 2011 04:48 |
Faceted surfaces in ICEM | Chriss | Main CFD Forum | 1 | May 6, 2008 15:18 |