Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Programming & Development

issues of recover solution

Updated Threads

Reply

Search this Thread

March 18, 2024, 15:01	issues of recover solution	#1
qingqingliu Member Ching Liu Join Date: Sep 2017 Posts: 47 Rep Power: 8	In the interCondensatingEvaporatingfoam, the phase change model is Lee model. I am adding a cavitation model in this solver. However, after modifying this solver, the solution cannot be recovered. In the standard solvers, when we stop the simulation and then re-start the simulation, the solver will continue to run. However, in the modified solver, when I stop and then re-start the simulation, the simulation can run, but the solution is completely wrong. Does anyone know the possible reasons?

Reply

Tags

phase change, recover, restart

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Convergence	Centurion2011	FLUENT	48	June 14, 2022 23:29
[Other] Installation issues with flex 2.6.0 and inelegant solution	windscion	OpenFOAM Installation	1	January 18, 2016 14:18
grid dependancy	gueynard a.	Main CFD Forum	19	June 27, 2014 21:22
Naca 0012 (compressible and inviscid) flow convergence problem	bipulsaha	FLUENT	1	July 6, 2011 07:51
Wall functions	Abhijit Tilak	Main CFD Forum	6	February 5, 1999 01:16

All times are GMT -4. The time now is 07:45.