|
[Sponsors] |
displacementLaplacian solver: move patch-nearest cells |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 18, 2011, 07:41 |
displacementLaplacian solver: move patch-nearest cells
|
#1 |
Senior Member
Arne Stahlmann
Join Date: Nov 2009
Location: Hanover, Germany
Posts: 209
Rep Power: 17 |
Hi all,
I'm using mesh motion with the displacementLaplacian solver and a modified interDymFoam solver. During runtime, the points on the bottom boundary patch, i.e. in the boundaryField, are modified and used as a boundary condition for the whole mesh motion. As my mesh somewhen gets distorted (I guess due to the fact that only the patch motion is given as a boundary condition), I'd like to move the cells (centroids) connected to the bottom patch as well, before the mesh motion solver is starting its job. Is this possible, and if so, how? My problem is that these cells are of course in the internalField, whereas the motion of the other cells of the internalField is not known at this stage. Arne |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] Fluent msh and cyclic boundary | cfdengineering | OpenFOAM Meshing & Mesh Conversion | 48 | January 25, 2013 03:28 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |
[mesh manipulation] Using createPatch in place of couplePatches | sripplinger | OpenFOAM Meshing & Mesh Conversion | 8 | November 13, 2009 07:14 |