Looking for dynamicTopoFvMesh tutorial or example

vasava · September 12, 2014, 06:17

I am looking to a tutorial or an example that uses dynamicTopoFvMesh solver. Please share if you have any.

Thank you!!

Mojtaba.a · September 13, 2014, 16:14

Hi,
Check these out:

http://foss.coep.org.in/spoken-tutor...yFiles_Mooney/

Best

vasava · September 17, 2014, 01:39

Thanks Mojtaba but the links not working.

Mojtaba.a · September 17, 2014, 08:26

Quote:

Originally Posted by vasava

Thanks Mojtaba but the links not working.

Yes, I think they are dead.
I have uploaded a mirror in here:

http://Trainbit.com/files/7158671884..._Mooney.tar.gz

Hope it helps.
Good luck.

vasava · September 18, 2014, 02:28

Thank you! I also found an alternate link with material from all the work shops. Here it is : http://sourceforge.net/projects/open...OAM_Workshops/

vasava · September 19, 2014, 08:56

Mojtaba, do you have any other cases? I am having problems with those tutorials (please read my post: http://www.cfd-online.com/Forums/ope...tml#post510904).

I am looking forwards to learn cases with multiple rotating parts.

Mojtaba.a · September 19, 2014, 09:36

Quote:

Originally Posted by vasava

Mojtaba, do you have any other cases? I am having problems with those tutorials (please read my post: http://www.cfd-online.com/Forums/ope...tml#post510904).

I am looking forwards to learn cases with multiple rotating parts.

I remember I had problems using adaptive tet remeshing in OF 2.3. Try foam-extended 3.1 and remember to pull to the latest repository and try again.
Right now I am not sure if those provided examples are belong to OF 2.3 or foam-extended 3.1.

September 12, 2014, 06:17	Looking for dynamicTopoFvMesh tutorial or example	#1
vasava Senior Member Paritosh Vasava Join Date: Oct 2012 Location: Lappeenranta, Finland Posts: 732 Rep Power: 22	I am looking to a tutorial or an example that uses dynamicTopoFvMesh solver. Please share if you have any. Thank you!!

September 13, 2014, 16:14		#2
Mojtaba.a Senior Member Mojtaba Amiraslanpour Join Date: Jun 2011 Location: Tampa, US Posts: 308 Rep Power: 15	Hi, Check these out: http://foss.coep.org.in/spoken-tutor...yFiles_Mooney/ Best __________________ Learn OpenFOAM in Persian SFO (StarCCM+ FLUENT OpenFOAM) Project Team Member Complex Heat & Flow Simulation Research Group If you can't explain it simply, you don't understand it well enough. "Richard Feynman"

September 18, 2014, 02:28		#5
vasava Senior Member Paritosh Vasava Join Date: Oct 2012 Location: Lappeenranta, Finland Posts: 732 Rep Power: 22	Thank you! I also found an alternate link with material from all the work shops. Here it is : http://sourceforge.net/projects/open...OAM_Workshops/ Ulf Janssens likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tutorial for subcooled nucleate boiling	Asghari	FLUENT	42	December 10, 2018 11:42
Problem on Fluent Tutorial: Horizontal Film Boilig	Feng	FLUENT	2	April 13, 2013 05:34
[Virtualization] OpenFOAM oriented tutorial on using VMware Player - support thread	wyldckat	OpenFOAM Installation	2	July 11, 2012 16:01
STAR-CD Tutorial	shekhar aryal	STAR-CD	4	March 22, 2010 03:25

September 17, 2014, 01:39		#3
vasava Senior Member Paritosh Vasava Join Date: Oct 2012 Location: Lappeenranta, Finland Posts: 732 Rep Power: 22	Thanks Mojtaba but the links not working.

September 19, 2014, 08:56		#6
vasava Senior Member Paritosh Vasava Join Date: Oct 2012 Location: Lappeenranta, Finland Posts: 732 Rep Power: 22	Mojtaba, do you have any other cases? I am having problems with those tutorials (please read my post: http://www.cfd-online.com/Forums/ope...tml#post510904). I am looking forwards to learn cases with multiple rotating parts.