|
[Sponsors] |
October 6, 2014, 12:10 |
LES about BC cyclic and turbulence
|
#1 |
Member
Jason Tan
Join Date: Sep 2014
Posts: 47
Rep Power: 12 |
I'm ready to use LES to simulation a duct square turbulence in OF,inlet and outlet are cyclic , but there's something about BC cyclic and turbulence bother me .
Question 1:cyclic BC. I manually set a cyclic BC wiyhout use any utility, but I saw the OF2.1/channelFoam/0.org/U ,the inlet and the outlet are divided into half,it's like inlet_half0、inlet_half1 and outlet_half0、outlet_half1 ,antbody could tell me ,why does it need divided into half,should I use any utility like createPatch or something to set cyclic ??How could I do that ? Question 2:turbulence Some page told me use the utility perturbU to create turbulence ,I compiled it correctly ,and use it in OF2.1.1,there are two questions I'm not clear 1.I used perturbU ,and it just created a new "U",but I saw the channelFoam,it created a new "0"folder ,the "k" "nusgs" "p" "U" became a new one ,original "0" became "0.org".why I use perturbU ,it just created a new "U" without a new "k" "nusgs" "p" ??? 2.the "U" file just change the streamdirection value ,but in the channelFoam/0/U,all direction value changed ,why ?? or I should use other utility to create turbulence ?? anybody help me ? best wishes . |
|
Tags |
cyclic les turbulence |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why Menter's SST model low-Re issue has not been seriously investigated? | vkrastev | OpenFOAM | 58 | January 8, 2018 16:20 |
How to setup cyclic BCs in simpleFOAM | hhuang84 | OpenFOAM Running, Solving & CFD | 14 | December 8, 2016 12:39 |
Unhandled coupledPolyPatch type cyclic | Ariane | OpenFOAM Running, Solving & CFD | 2 | April 20, 2016 11:52 |
setup problems - LES pipe flow with cyclic BC (1) and direct mapped inlet (2) | florian_krause | OpenFOAM | 22 | June 13, 2013 22:25 |
Wrong wall distance with cyclic boundaries | sebastian | OpenFOAM Bugs | 4 | October 31, 2012 11:24 |