|
[Sponsors] |
swirl inlet velocity for a 2-d axisymmetric flow |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 10, 2015, 06:41 |
swirl inlet velocity for a 2-d axisymmetric flow
|
#1 |
New Member
zahra rashidi
Join Date: Dec 2014
Posts: 9
Rep Power: 11 |
hi every body,
I have used blockmesh to create a wedge type mesh for an axisymmetric vortextube . i want to do an axisymmetric simulation with a swirl flow at the inlet,and i have some questions: 1-as u khow the equations will be different with the cartesian coordinate because of existence of swirl,does the code change them into correct one or i shuld change them myself?! 2-if i want to use "swirlFlowRateInletVelocity"in oF derived b.c, it just enter a swirl mass flow normal to boundary!but in my case the flow have both tangentional and radial velocity too,it means the swirl is not normal to boundary ,how can i intruduce the swirl flow that have radial velocity too as a B.C at inlet?! the B.C of my case( 2-d axisymmetric) in inlet is: { mass flow rate:0.2184 kg/s tngentional velocity:200 m/s radial velocity:90 m/s} I appreciate all your views and answers to these |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What's the difference between velocity inlet and mass flow inlet? | soheil.e.nia | FLUENT | 5 | August 20, 2014 14:08 |
flow around a circular cylinder with velocity inlet and outflow outlet | shuoxue | OpenFOAM | 1 | March 3, 2014 10:42 |
Steady pipe flow mean velocity higher than inlet velocity | anita | OpenFOAM Running, Solving & CFD | 7 | September 25, 2012 05:35 |
Problem with time average tangential velocity in swirl flow. | lakhi | FLUENT | 5 | July 18, 2012 16:28 |
Velocity Inlet BC -- Flow Reversal | salihovic | FLUENT | 0 | May 8, 2011 05:45 |