|
[Sponsors] |
October 28, 2015, 01:36 |
Issues with VoF model with interDyMFoam
|
#1 |
New Member
Matthias T.
Join Date: Dec 2014
Posts: 5
Rep Power: 11 |
Good Morning everybody,
I have been working on a VoF model with interDyMFoam for a while. It is basicly a mixer with fluid injection from below and an outlet at the side. At the top a gas flow from a gas inlet to an outlet is set. The mixer rotates at 500 rpm. The BCs are inlet vel at liquid inlet, outlet vel at gas outlet (I know thats not ideal), pressure at gas inlet. I can get this model running, but after some time (ca 0.005 - 0.1 s) it crashes. The velocities start to increase at one random single point without clear indication. I observed that the p equations iterate to eternity just before it happens. What I have tried so far:
Does anybody have an idea what else I could try to solve this issue Thanks for any help. Cheers Mat P.S.: I forgot to mention. for the inlets/outlets with fixed velocity I used fixedFluxPressure BC Last edited by mapeth; October 28, 2015 at 01:59. Reason: Forgot to mention something |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
VOF model error:Cortex received a fatal signal (SEGMENTATION VIOLATION) | Sdezmond | Fluent Multiphase | 4 | July 20, 2017 03:03 |
Using VOF model and Lagrangian Multiphase in the same simulation | ganesh_krishnan | STAR-CCM+ | 2 | March 17, 2017 01:34 |
VOF model | heri | FLUENT | 6 | April 22, 2008 11:02 |
VOF model | Aly | FLUENT | 3 | April 22, 2005 13:43 |
Moving mesh or VOF? | Giovanni | Main CFD Forum | 16 | September 24, 2001 08:25 |