LES problems for nozzle geometry -- CFD Online Discussion Forums

December 7, 2015, 06:41	LES problems for nozzle geometry	#1
Bogdan90 New Member Bogdan Osyka Join Date: Oct 2015 Posts: 4 Rep Power: 10	Hi foamers, I am simulating the flow in a nozzle geometry(see attached file) using the LES turbulence model. The condition for the flow is such that the Re in the throat (the connecting pipe) is 3500, which is a transient flow, however when I simulate I get a perfect laminar flow, which contradicts with benchmarks and RANS simulations for the same problem. I have experimented with different profiles and different LES models but result is pretty much the same. I am really stuck with this problem for more than a month, so I hope I can here some suggestions from you image001.jpg) jbliu2015 likes this.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Problems with coedge curves and surfaces	tommymoose	ANSYS Meshing & Geometry	6	December 1, 2020 11:12
[DesignModeler] having problems with filling geometry	magnusDux85	ANSYS Meshing & Geometry	37	July 29, 2015 04:46
[ICEM] Problems with geometry when defining boundary conditions	darazsbence	ANSYS Meshing & Geometry	2	February 24, 2013 09:07
LES on a scaled geomentry (Mesh and Large scales)	comb	Main CFD Forum	0	February 8, 2011 06:21
[Gmsh] Problem meshing an imported geometry	Alicia	OpenFOAM Meshing & Mesh Conversion	0	March 30, 2010 04:53

All times are GMT -4. The time now is 04:15.