|
[Sponsors] |
November 20, 2017, 09:56 |
InterDyMFoam error
|
#1 |
New Member
Emanuele De Stradis
Join Date: Nov 2017
Posts: 14
Rep Power: 8 |
Hi guys,
I'm a beginner in the use of openFoam so I'm having some problems. I'm trying to simulate the slamming of an hull on the water by using interDyMFoam for my graduation project. I have placed the hull at a certain height from the water and let it move at the velocity of 1 m/s in the negative z direction to evaluate pressure on the hull due to the impact on the water. Now, when I run interDyMFoam, i got this error after some timesteps: Courant Number mean: 0.00212778 max: 6.57496 Interface Courant Number mean: 1.95423e-05 max: 0.0120632 deltaT = 0.000951527 Time = 0.00565446 PIMPLE: iteration 1 DICPCG: Solving for cellMotionUz, Initial residual = 0.00875879, Final residual = 9.55665e-09, No Iterations 44 Execution time for mesh.update() = 9.36 s GAMG: Solving for pcorr, Initial residual = 1, Final residual = 0.0598646, No Iterations 4 time step continuity errors : sum local = 8.80194e-07, global = 3.47383e-08, cumulative = -2.26463e-08 smoothSolver: Solving for alpha.water, Initial residual = 1.0246e-05, Final residual = 4.76097e-11, No Iterations 1 Phase-1 volume fraction = 0.412872 Min(alpha.water) = -1.62871e-88 Max(alpha.water) = 1 Applying the previous iteration compression flux MULES: Correcting alpha.water MULES: Correcting alpha.water MULES: Correcting alpha.water MULES: Correcting alpha.water Phase-1 volume fraction = 0.412872 Min(alpha.water) = -3.47749e-16 Max(alpha.water) = 1 #0 Foam::error:rintStack(Foam::Ostream&) at ??:? #1 Foam::sigFpe::sigHandler(int) at ??:? #2 ? in "/lib/x86_64-linux-gnu/libc.so.6" #3 Foam::GAMGSolver::scale(Foam::Field&, Foam::Field&, Foam::lduMatrix const&, Foam::FieldField const&, Foam::UPtrList const&, Foam::Field const&, unsigned char) const at ??:? #4 Foam::GAMGSolver::Vcycle(Foam::PtrList const&, Foam::Field&, Foam::Field const&, Foam::Field&, Foam::Field&, Foam::Field&, Foam::Field&, Foam::Field&, Foam::PtrList&, Foam::PtrList&, unsigned char) const at ??:? #5 Foam::GAMGSolver::solve(Foam::Field&, Foam::Field const&, unsigned char) const at ??:? #6 Foam::fvMatrix::solveSegregated(Foam::dictionary const&) at ??:? #7 Foam::fvMatrix::solve(Foam::dictionary const&) in "/opt/openfoam4/platforms/linux64GccDPInt32Opt/bin/interDyMFoam" #8 ? in "/opt/openfoam4/platforms/linux64GccDPInt32Opt/bin/interDyMFoam" #9 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #10 ? in "/opt/openfoam4/platforms/linux64GccDPInt32Opt/bin/interDyMFoam" I tried to run moveDynamicMesh and I noticed that some bad cells appeared (non-orthogonalities, negative volumes ecc..) after some timesteps, but the initial mesh is perfect. Maybe it can be a problem of the solver but I've read that velocityLaplacian is the best for these cases. Can someone help me to solve this problem? I would be really grateful. I attach my controlDict and dynamicMeshDict files. Thank you all. Emanuele Last edited by Emanueledes; November 20, 2017 at 13:08. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[blockMesh] blockMesh with double grading. | spwater | OpenFOAM Meshing & Mesh Conversion | 92 | January 12, 2019 09:00 |
DPM udf error | haghshenasfard | FLUENT | 0 | April 13, 2016 06:35 |
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh | gschaider | OpenFOAM Community Contributions | 300 | October 29, 2014 18:00 |
ParaView for OF-1.6-ext | Chrisi1984 | OpenFOAM Installation | 0 | December 31, 2010 06:42 |
DecomposePar links against liblamso0 with OpenMPI | jens_klostermann | OpenFOAM Bugs | 11 | June 28, 2007 17:51 |