|
[Sponsors] |
BC to use for applying contact angle on a permeable wall in porous media |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 24, 2018, 22:19 |
BC to use for applying contact angle on a permeable wall in porous media
|
#1 |
Senior Member
A-A Azarafza
Join Date: Jan 2013
Posts: 226
Rep Power: 14 |
Hi to all,
I am working on a multiphase model in OpenFoam with two regions i.e., one porous media and the other is fluid. I am wondering which boundary condition I need to apply for the interface, so I would be able to define contact angle for the permeable wall (interface) and also let the species go through it (permeable wall)? Please, see the brief schematic below Thanks, Abouzar ------------------------------ region 1: gas mixture+ liquid water droplets ------------------------------ permeable wall, I need contact angle here! region 2: porous media, with porosity, K ------------------------------
__________________
Regard yours |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 07:30 |
thermal couple boundary condition between porous and fluid regions | atoof | OpenFOAM Programming & Development | 2 | June 7, 2017 19:44 |
how to use UDF or method to define Boundary condition for Porous media in NLTE | hitchenxue | FLUENT | 0 | April 19, 2014 02:40 |
Error finding variable "THERMX" | sunilpatil | CFX | 8 | April 26, 2013 07:00 |
porous media: Fluent or Star-CD? | Igor | Main CFD Forum | 0 | December 5, 2002 15:16 |