|
[Sponsors] |
March 22, 2021, 11:49 |
negative temperature with twoPhaseEulerFoam
|
#1 |
New Member
Thibaut
Join Date: Nov 2020
Posts: 21
Rep Power: 5 |
Hi,
I'm trying to simulate a mix of gas and dust against a disc using twoPhaseEulerFoam. After some iterations, the solver stops without any error message, but we can see some negative temperature for the air: Courant Number mean: 0.122993 max: 0.401974 Max Ur Courant Number = 0.0456224 Time = 0.195 PIMPLE: iteration 1 MULES: Solving for alpha.particles MULES: Solving for alpha.particles smoothSolver: Solving for alpha.particles, Initial residual = 1.22398e-08, Final residual = 2.15733e-15, No Iterations 1 alpha.particles volume fraction = 0.199907 Min(alpha.particles) = 0.00159117 Max(alpha.particles) = 0.992272 Constructing momentum equations smoothSolver: Solving for e.particles, Initial residual = 0.0643472, Final residual = 2.2115e-12, No Iterations 3 smoothSolver: Solving for e.air, Initial residual = 0.252945, Final residual = 2.55661e-13, No Iterations 5 min T.particles 119.995 min T.air -18672.9 GAMG: Solving for p_rgh, Initial residual = 0.999183, Final residual = 3.63007e-18, No Iterations 1 GAMG: Solving for p_rgh, Initial residual = 1.40899e-18, Final residual = 1.40899e-18, No Iterations 0 PIMPLE: iteration 2 MULES: Solving for alpha.particles MULES: Solving for alpha.particles smoothSolver: Solving for alpha.particles, Initial residual = 1.07889e-08, Final residual = 2.02332e-15, No Iterations 1 alpha.particles volume fraction = 0.199984 Min(alpha.particles) = 0.00158145 Max(alpha.particles) = 0.996012 Constructing momentum equations. I tried to change the pressure tolerance, to change deltaT,etc.. I always have this behaviour. How can I fix it ? Imposing a limit to the temperature doens't work. I joined the files case. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
whats the cause of error? | immortality | OpenFOAM Running, Solving & CFD | 13 | March 24, 2021 07:15 |
[blockMesh] Errors during blockMesh meshing | Madeleine P. Vincent | OpenFOAM Meshing & Mesh Conversion | 51 | May 30, 2016 10:51 |
[blockMesh] non-orthogonal faces and incorrect orientation? | nennbs | OpenFOAM Meshing & Mesh Conversion | 7 | April 17, 2013 05:42 |
is internalField(U) equivalent to zeroGradient? | immortality | OpenFOAM Running, Solving & CFD | 7 | March 29, 2013 01:27 |
[blockMesh] error message with modeling a cube with a hold at the center | hsingtzu | OpenFOAM Meshing & Mesh Conversion | 2 | March 14, 2012 09:56 |