|
[Sponsors] |
chtMultiRegionFoam + solarLoad initialization error |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 12, 2024, 18:47 |
chtMultiRegionFoam + solarLoad initialization error
|
#1 |
New Member
Andrew Arnold
Join Date: Apr 2024
Posts: 2
Rep Power: 0 |
Hi everyone:
I've modified the externalSolarLoad (eSL) viewFactor tutorial to incorporate a new geometry, having both air on the inside of the solid region (so that the solid region is a shell) and reducing the problem to two dimensions in the typical OpenFOAM way. The mesh is made using gmsh and imported via gmshToFoam. I've attached an image of the mesh. I now have regions I've called interior, exterior, envelope, and ground. For interior and exterior, I've copied the air files of eSL; for envelope, solid; and for ground, floor. I added a pRefCell and pRefValue to the fvSolution for the interior, as it doesn't have fixed value BCs. Meshing seems to work just fine, but I am getting an error, seemingly with the radiation model. From the stack trace: [stack trace] ============= #1 Foam::sigSegv::sigHandler(int)sh: 1: addr2line: not found addr2line failed #2 __kernel_rt_sigreturn #3 Foam::radiation::solarLoad::updateSkyDiffusiveRadi ation(Foam::HashSet<int, Foam::Hash<int> > const&, Foam::HashSet<int, Foam::Hash<int> > const&)sh: 1: addr2line: not found addr2line failed #4 Foam::radiation::solarLoad::calculate()sh: 1: addr2line: not found addr2line failed #5 Foam::radiation::viewFactor::calculate()sh: 1: addr2line: not found addr2line failed #6 Foam::radiation::radiationModel::correct()sh: 1: addr2line: not found addr2line failed #7 ?sh: 1: addr2line: not found addr2line failed #8 ?sh: 1: addr2line: not found addr2line failed #9 __libc_start_mainsh: 1: addr2line: not found addr2line failed #10 ?sh: 1: addr2line: not found addr2line failed ============= Segmentation fault I have no clue how to debug this error. I can post whatever information you need to help with this error. Thank you so much! |
|
Tags |
chtmultiregionfoam, solarload |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
long error when using make-install SU2_AD. | tomp1993 | SU2 Installation | 3 | March 17, 2018 06:25 |
[OpenFOAM] Native ParaView Reader Bugs | tj22 | ParaView | 270 | January 4, 2016 11:39 |
Ansys Fluent 13.0 UDF compilation problem in Window XP (32 bit) | Yogini | Fluent UDF and Scheme Programming | 7 | October 3, 2012 07:24 |
checking the system setup and Qt version | vivek070176 | OpenFOAM Installation | 22 | June 1, 2010 12:34 |
Problem with compile the setParabolicInlet | ivanyao | OpenFOAM Running, Solving & CFD | 6 | September 5, 2008 20:50 |