|
[Sponsors] |
August 9, 2007, 15:34 |
I just recently started using
|
#1 |
New Member
Joseph F Slomski
Join Date: Mar 2009
Location: West Bethesda, MD, USA
Posts: 8
Rep Power: 17 |
I just recently started using FOAM (v1.4). After exercising and reviewing the tutorials, I'm running my own problem. It's a channel flow problem, with a forward facing step entry. It's ultimately an LES problem, but I'm running simpleFoam on it to generate a RANS field as an initial condition for the LES.
I'm using the PCG solver for pressure, with the DIC pre-conditioner. My concern is that at each time step the pressure iterations max out (I presume) at 1001. My relTol is 0.01. I've tried backing off on relTol to 0.1, but the p iterations still max out. Use of paraFoam to examine the solution indicates the velocity and pressure fields are reasonable. I'm using an under-relaxation factor of 0.3 for p. Anyone have any thoughts on what might be causing the excessive number of p iterations? Thanks, Joe |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
preconditioner of a matrix | khaiching | Main CFD Forum | 4 | June 18, 2006 20:07 |
Informations about LU-SGS preconditioner | Renato N. Elias | Main CFD Forum | 0 | September 9, 2005 11:06 |
Preconditioner for BiCSTAB | Márcio Ricardo | Main CFD Forum | 1 | October 12, 2004 07:10 |
Appropriate Preconditioner | Joe cool | Main CFD Forum | 0 | June 28, 2004 21:18 |
Preconditioner | Nailya | Main CFD Forum | 2 | August 31, 2001 17:58 |