|
[Sponsors] |
Star4ToFoam import boundaries in polyhedral mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 5, 2007, 03:15 |
Hi all,
I would like to conve
|
#1 |
Member
|
Hi all,
I would like to convert into Foam a pro-Star4 format mesh. I have done this procedure many times without problems, the peculiarity is that this time the mesh is composed by polyhedral elements. Being a test the chosen mesh is very simple: a single cylinder with inlet, outlet and wall. I found some errors in importing the boundary conditions set up with pro-Star4. The geometry is exactly converted but boundary polymesh fails to be created. Two types of error come out: ... There are 2554 faces to be patched and 237 specified - collect missed boundaries to final patch meshReader::createPolyBoundary(): Problem with face: 6(11916 17960 17961 17962 17963 11917) Probably trying to define a boundary face on a previously matched internal face. Internal face: 6(11916 17960 17961 17962 17963 11917) ... and ... meshReader::createPolyBoundary() : problem with face 1278: addressed 1 times (should be 2!). Face: 6(2011 2012 2013 2014 2015 2016) ... Is there anyone that already found this errors? How did you solve it? Thanks a lot for the help Cosimo
__________________
Cosimo Bianchini Ergon Research s.r.l. Via Panciatichi, 92 50127 Florence - ITALY Tel: +39 055 0763716 Mob: +39 320 9460153 e-mail: cosimo.bianchini@ergonresearch.it URL: www.ergonresearch.it |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Polyhedral Mesh | Diego Flores | FLUENT | 17 | August 21, 2020 13:52 |
CGNS import in fluent - periodic boundaries. | Bjarne Børresen | FLUENT | 2 | April 25, 2013 11:12 |
[Commercial meshers] Import error Gambit msh file with Cell Type 7 polyhedral cells | philippose | OpenFOAM Meshing & Mesh Conversion | 1 | June 1, 2007 02:58 |
polyhedral mesh | guang ai | Siemens | 3 | May 28, 2006 01:02 |
CGNS mesh import and boundaries | Barbaros | CFX | 0 | May 6, 2004 16:34 |