|
[Sponsors] |
July 10, 2005, 21:50 |
I tried to produce a lid drive
|
#1 |
Senior Member
Billy
Join Date: Mar 2009
Posts: 167
Rep Power: 17 |
I tried to produce a lid driven cavity flow using interFoam. I set initial values of gamma in some cells to 1.0 and the rest to 0.0. I wanted to simulate a mixing of two fluids, however I get always the same message even using smaller time steps:
... Reading transportProperties Selecting incompressible transport model Newtonian Selecting incompressible transport model Newtonian Calculating field g.h time step continuity errors : sum local = 0, global = 0, cumulative = 0 Starting time loop Max Courant Number = -0 Time = 0.001 Liquid phase volume fraction = 0 Min(gamma) = 0 Max(gamma) = 0 Liquid phase volume fraction = 0 Min(gamma) = 0 Max(gamma) = 0 Liquid phase volume fraction = 0 Min(gamma) = 0 Max(gamma) = 0 Liquid phase volume fraction = 0 Min(gamma) = 0 Max(gamma) = 0 time step continuity errors : sum local = nan, global = nan, cumulative = nan ExecutionTime = 0.12 s ... Does anyone know what might be wrong? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
driven cavity | neelam | Main CFD Forum | 0 | June 13, 2007 00:36 |
Lid Driven Cavity 3D | Mathias Krause | Main CFD Forum | 5 | October 17, 2006 06:34 |
3D Lid Driven Cavity | Danny | Main CFD Forum | 0 | October 22, 2002 03:09 |
2D Lid-Driven cavity | Sophie | Main CFD Forum | 8 | April 28, 2002 18:34 |
Lid-Driven Cavity | Paul Safier | Main CFD Forum | 4 | February 19, 2002 06:20 |