[impecca]

Hi, foamers.

Is there anyone who can recommend me a SGS model for the airfoil case?
(of course LES, Reynolds number is less than 100,000)
Based on some literature reviews, some works are done with 'Dynamic smagorinsky' model and some works are done with 'Mixed-sclae model' ( Sagaut, P. 1996 : Numerical simulations of separated flows with subgrid models) or 'Mixed-time model' (Inagaki et al. 2005 : A Mixed-time-scale SGS model with fixed model - parameters for practical LES).


I've checked 'dynamic Smagorinsky model' in openfoam but one line (below) is ambiguous in the dynSmagorinsky.C file.


00060 dimensionedScalar MMMM = average(magSqr(MM));


here I don't understand what 'average' means. Does it mean averaging in whole domain? if it means averaging whole domain, this model doesn't seem so attractive since original model averaged only in homogeneous directions.

So I tried to look for 'Mixed-scale model' or 'Mixed-time model' in openfoam but these two models are not implemented yet. I am also wondering is there anyone who implemented these two models into openfoam.


To sum,
which sgs model do you recommend for the airfoil case ?
what is the 'average' mean in the 'dynamic Smagorinsky model' ?
Is there anyone who implement 'Mixed -scale model' or 'Mixed-time model' into the openfoam ?

Thanks in advance

Yusik