|
[Sponsors] |
January 21, 2013, 08:43 |
value for pressureInletOutlet bc
|
#1 |
New Member
sirshosona
Join Date: Jan 2013
Posts: 4
Rep Power: 13 |
I want to use pressureinletoutletVelocity boundary condition for velocity at outlet as this is not fully developed (there is a chance to be backflow) flow. But my question is what the value I should set? Is it always (0 0 0)? What is the function of this fixed value of velocity?
type pressureInletOutletVelocity; value uniform (0 0 0) |
|
January 25, 2013, 13:30 |
|
#2 |
Senior Member
Nima Samkhaniani
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,266
Blog Entries: 1
Rep Power: 24 |
as i guess this BC calculate velocity based on pressure, so
value uniform (0 0 0) is place holder
__________________
My Personal Website (http://nimasamkhaniani.ir/) Telegram channel (https://t.me/cfd_foam) |
|
January 25, 2013, 14:08 |
|
#3 |
New Member
sirshosona
Join Date: Jan 2013
Posts: 4
Rep Power: 13 |
Thanx Nima Sam for your reply.
If I put (0 0.6 0) instead of (0 0 0) whether it will affect the simulation or not? |
|
January 25, 2013, 14:22 |
|
#4 |
Senior Member
Nima Samkhaniani
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,266
Blog Entries: 1
Rep Power: 24 |
i guess nope , but i recommend you to see source code
__________________
My Personal Website (http://nimasamkhaniani.ir/) Telegram channel (https://t.me/cfd_foam) |
|
|
|