|
[Sponsors] |
Need guidance and tips about a fluidized bed reactor gasifier simulation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 8, 2015, 16:54 |
Need guidance and tips about a fluidized bed reactor gasifier simulation
|
#1 |
New Member
César Augusto Corrêa Miguéis
Join Date: Nov 2013
Location: Rio de Janeiro, Brasil
Posts: 26
Rep Power: 12 |
Hi everybody! First of all, let me say that I've started to learn how to use OpenFOAM about a month ago, so I've only studied the tutorial cases that are presented in the official guide.
I would like to receive some help on how to setup a case for the simulation of a fluidized bed reactor gasifier. In my study, I'd like to simulate the gasification process of biomass, using an Euler-Lagrange approach. The turbulence moddeling would use LES approach, but I'm still studying this subject to decide about it. The flow is compressible. I'll try to give a brief explanation about the whole case that I want to simulate:
I hope this picture can help a little bit the understanding of the situation: So, I woul appreciate any help or tip anyone can give me. Thanks in advance, and regards from Brasil.
__________________
César Miguéis Mechanical Engineer MSc. Student at COPPE/UFRJ |
|
Tags |
combustion, gasification, lagrangian particles, reactin flow, turbulent flow |
|
|