|
[Sponsors] |
January 21, 2018, 11:40 |
Mapped Boundary Condition
|
#1 |
New Member
TSE Kwan Shu
Join Date: Sep 2016
Posts: 10
Rep Power: 9 |
I would like to use the "mapped boundary condition" as the recycling method to specify inlet boundary condition for LES simulation, so that the field U and k on a certain plane downstream of the inlet is mapped back to the inlet for the next time step.
I read through the thread mapped boundary condition and the code guide https://www.openfoam.com/documentati...e.html#details Does anyone know what do the following choices mean: - nearestCell : sample cell containing point - nearestOnlyCell : nearest sample cell (even if not containing point) - nearestPatchFace : nearest face on selected patch - nearestPatchFaceAMI : nearest face on selected patch A.patches need not conform B. uses AMI interpolation - nearestFace : nearest boundary face on any patch - nearestPatchPoint : nearest patch point (for coupled points this might be any of the points so you have to guarantee the point data is synchronised beforehand) Thanks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 07:30 |
OpenFoam mapped boundary condition | Eman. | OpenFOAM | 5 | January 19, 2019 06:10 |
My radial inflow turbine | Abo Anas | CFX | 27 | May 11, 2018 01:44 |
Centrifugal fan-reverse flow in outlet lesds to a mass in flow field | xiexing | CFX | 3 | March 29, 2017 10:00 |
Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 06:28 |