Implementing a B.C. from a csv -- CFD Online Discussion Forums

June 10, 2020, 11:06

Implementing a B.C. from a csv

sibo11890

New Member

Sibo Anthony Athikho

Join Date: Apr 2020

Posts: 2

Rep Power: 0

Dear Foamers,

I am trying to simulate mixed convection over a heated flat plate. The simulation is 3D and the boundary conditions are available in a .csv format. I am trying to apply a temperature profile (in csv format) B.C. on the plate in the x and z direction using the fixedProfile boundary condition. However, I am unable to do so as I could not find the option for adding the two co-ordinate directions. So, how do i add two coordinate directions using the fixedProfile boundary condition? What are the other options through which the desired boundary condition can be implemented?

I am attaching a diagram of the problem, the csv file and T file.

Note: The first and second column in the csv file are the x and z coordinates.

Attached Files

attachement.zip (46.3 KB, 55 views)

Tags

csvfile, fixedprofile, openfoam6

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[extend-bazaar] How to apply timeVaryingSolidTraction B.C. to fsiFoam?	postechkian	OpenFOAM Programming & Development	1	April 8, 2019 04:25
Problem with reading CSV files	MrNinainaidi	OpenFOAM Running, Solving & CFD	1	July 2, 2015 05:34
question about implementing boundary conditions	saygin	Main CFD Forum	0	July 6, 2006 07:08
Urgent! Help on UDF to set B.C. of 3rd type	Ray Hong	FLUENT	0	December 28, 2005 19:35
How to set B.C. of the 2nd or 3rd type in UDS?	Ray Hong	FLUENT	0	December 28, 2005 06:03

All times are GMT -4. The time now is 15:15.