|
[Sponsors] |
May 11, 2010, 09:23 |
time step continuity error, fvScheme
|
#1 |
Member
achinta
Join Date: May 2010
Location: Sydney
Posts: 66
Rep Power: 16 |
Hi,
I am working on a 3D Mesh(4 million cells-300MBsize). I am using simpleFoam (turbulent modeling-similar to the one given in tutorials//incompressible/simpleFoam/pitzDaily ). I have changed the Boundary conditions according to the problem statement.(NOTE: for modeling wall -'wedge' constraint is used..for rotational periodic). I am getting the following error. ------------------------------------------------------------------------ Create time Create mesh for time = 0 Reading field p Reading field U Reading/calculating face flux field phi Selecting incompressible transport model Newtonian Selecting RAS turbulence model kEpsilon kEpsilonCoeffs { Cmu 0.09; C1 1.44; C2 1.92; sigmaEps 1.3; } Starting time loop Time = 1 DILUPBiCG: Solving for Ux, Initial residual = 1, Final residual = 0.0897376, No DILUPBiCG: Solving for Uy, Initial residual = 1, Final residual = 0.0695567, No DILUPBiCG: Solving for Uz, Initial residual = 1, Final residual = 0.0733983, No DICPCG: Solving for p, Initial residual = 1, Final residual = 0.00982204, No It erations 951 time step continuity errors : sum local = 9.06009e-05, global = -6.32167e-06, cu mulative = -6.32167e-06 #0 Foam::error:rintStack(Foam::Ostream&) in "/usr/logau/expsm/OpenFOAM/OpenFO AM-1.6/lib/linux64GccDPOpt/libOpenFOAM.so" #1 Foam::sigFpe::sigFpeHandler(int) in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/ lib/linux64GccDPOpt/libOpenFOAM.so" #2 ?? in "/lib64/libc.so.6" #3 void Foam::magSqr<Foam::SymmTensor<double>, Foam::fvPatchField, Foam::volMes h>(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>&, Foam::Geome tricField<Foam::SymmTensor<double>, Foam::fvPatchField, Foam::volMesh> const&) i n "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libincompressibleR ASModels.so" #4 Foam::tmp<Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> > Foam::magSqr<Foam::SymmTensor<double>, Foam::fvPatchField, Foam::volMesh>(Foam:: tmp<Foam::GeometricField<Foam::SymmTensor<double>, Foam::fvPatchField, Foam::vol Mesh> > const&) in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/l ibincompressibleRASModels.so" #5 Foam::incompressible::RASModels::kEpsilon::correct () in "/usr/logau/expsm/Op enFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libincompressibleRASModels.so" #6 main in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/applications/bin/linux64GccD POpt/simpleFoam" #7 __libc_start_main in "/lib64/libc.so.6" #8 _start at /usr/src/packages/BUILD/glibc-2.9/csu/../sysdeps/x86_64/elf/start. S:116 floating decimal point exception --------------------------------------------------------------------- Could anyone please tell what may the problem? Thank You, Achinta Last edited by achinta; May 11, 2010 at 09:59. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TimeVaryingMappedFixedValue | irishdave | OpenFOAM Running, Solving & CFD | 32 | June 16, 2021 06:55 |
Transient simulation not converging | skabilan | OpenFOAM Running, Solving & CFD | 14 | December 16, 2019 23:12 |
HELP! time step too small? | meangreen | Main CFD Forum | 6 | May 31, 2018 10:41 |
interDyMFoam - change in volume fraction | gopala | OpenFOAM Running, Solving & CFD | 0 | April 27, 2009 10:46 |
unsteady calcs in FLUENT | Sanjay Padhiar | Main CFD Forum | 1 | March 31, 1999 12:32 |