 |
 |
 |
|
|
|
[Sponsors] | ||||
drag coeff to high - kOmegaSST turbulence model |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 26, 2011, 10:51
|
drag coeff to high - kOmegaSST turbulence model
|
#1 |
|
Member
Martin
Join Date: Aug 2010
Location: Germany
Posts: 55
Rep Power: 15  |
Dear Users,
i have a problem with the drag coefficient calculated by the kOmegaSST turbulence model with the simpleFOAM solver :-( The aim is to get to know about the drag coefficient of a streamlined body and compare this results with the ones got by the same body out of a wind tunnel experiment. So in fact - compare reality an CFD  The coefficient i should get for cd is about 0.07, the one i got from my calculations is somewhat around 0.96... I have calculated values for k and omega from the formulas out of the CFDWiki, but they seem to be incorrect - or a BC is the problem - i don't know  The eddy viscosity ratio i took was 1, but i don't know if this is correct for wind tunnel experiments...? I will post my case files - maybe someone do have an idea...!? Thank you very much in advance Regards, Martin |
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 05:36 |
| turbulence model equation | Andy Chen | FLOW-3D | 4 | January 1, 2010 21:45 |
| build your own turbulence model with buoyancy | Thomas Baumann | OpenFOAM | 11 | November 23, 2009 08:53 |
| v2-f turbulence model in CFX? | flga | CFX | 14 | November 23, 2006 06:12 |
Threaded Mode
