|
[Sponsors] |
July 5, 2011, 07:25 |
yPlusRAS in pisoFOAM
|
#1 |
Member
|
Hello!
I had some troubles with calculating yplus. Well, I use OF-1.7.1, model is Spalart-Allmaras. In terminal after calculating pisoFoam I type yPlusRAS and for all my time steps I have the same result: Reading field U Reading/calculating face flux field phi Selecting incompressible transport model Newtonian Selecting RAS turbulence model SpalartAllmaras SpalartAllmarasCoeffs { sigmaNut 0.66666; kappa 0.41; Cb1 0.1355; Cb2 0.622; Cw2 0.3; Cw3 2; Cv1 7.1; Cv2 5; } Patch 3 named ground y+ : min: 0 max: 0 average: 0 Patch 6 named nok y+ : min: 0 max: 0 average: 0 Writing yPlus to field yPlus Why I have this result? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Differences in solution method for pisoFoam and buoyantBoussinesqPisoFoam | mchurchf | OpenFOAM | 7 | August 6, 2023 09:12 |
pisoFoam compiling error with OF 1.7.1 on MAC OSX | Greg Givogue | OpenFOAM Programming & Development | 3 | March 4, 2011 17:18 |
Trouble migrating oodles to pisoFoam while changing from OF 1.5 to 1.7 | sebi | OpenFOAM | 0 | December 7, 2010 09:00 |
yPlusRAS with rhoTurbFoam | fightingfalcon23 | OpenFOAM Post-Processing | 2 | October 19, 2009 07:43 |
yPlusRAS in OF 1.6.x - Low Re Models | ivan_cozza | OpenFOAM Running, Solving & CFD | 0 | September 23, 2009 05:27 |