|
[Sponsors] |
[OpenFOAM] Difference in the number of cells between ParaView and checkMesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 15, 2015, 07:39 |
Difference in the number of cells between ParaView and checkMesh
|
#1 |
New Member
Join Date: Jun 2015
Location: UK
Posts: 13
Rep Power: 10 |
Hello everyone,
I'm comparing the efficiency of different snappyHexMesh meshes and to do so I'm paying attention to the number of cells of the mesh. And I made the weird discovery that checkMesh and ParaView don't agree on the number of cells of the mesh! For example, for the same mesh, the Statistics inspector of ParaView gives 3.995.096 cells: https://drive.google.com/file/d/0B_T...ew?usp=sharing While the checkMesh result gives 1.105.136 cells: Code:
Create time Create polyMesh for time = 0 Time = 0 Mesh stats points: 1593493 faces: 3707462 internal faces: 3262532 cells: 1105136 faces per cell: 6.3069106 boundary patches: 3 point zones: 0 face zones: 0 cell zones: 0 And any explanations for this huge difference? I have compared several meshes and the ratio is typically around 4 in favor of ParaView everytime. Martin |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[OpenFOAM] Visualizing checkMesh results in Paraview | Claudio | ParaView | 15 | July 21, 2020 13:58 |
[blockMesh] checkMesh Floating point exception error | daniel.almeida | OpenFOAM Meshing & Mesh Conversion | 0 | July 31, 2015 14:26 |
[Other] Different number of cells | Yuby | OpenFOAM Meshing & Mesh Conversion | 2 | May 10, 2015 14:12 |
[OpenFOAM] ParaView shows bad cells, checkMesh doesn't seem to notice. | CoolHand | ParaView | 2 | August 21, 2014 15:58 |
Visualize checkMesh output with Paraview | Horus | OpenFOAM | 1 | May 29, 2012 11:51 |