|
[Sponsors] |
July 7, 2015, 18:20 |
naca0012 mesh generation
|
#1 |
New Member
seif
Join Date: Jul 2015
Location: egypt
Posts: 2
Rep Power: 0 |
I'm trying to do a mesh for 2D naca0012 airfoil chord length is 0.3m,but the aspect ratio is very high and also the equiangle skewness,i used c-type mesh, for y+0.2 I use (delta S) 10e-5,i spent a lot of time to try make good mesh to be working with fluent but it keep say error, what can I do??
|
|
July 8, 2015, 08:31 |
|
#2 |
Senior Member
Travis Carrigan
Join Date: Jul 2010
Location: Arlington, TX
Posts: 161
Rep Power: 15 |
I put together a video describing how to generate a c-grid for a NACA 0012. You can find it at https://youtu.be/eEzxxdn-47U
|
|
July 8, 2015, 17:53 |
|
#3 |
New Member
seif
Join Date: Jul 2015
Location: egypt
Posts: 2
Rep Power: 0 |
thank u for ur help but my airfoil is not sharp edge trailing edge, so this didn't work at the step of deleting the edges and manually redefine them ,may be u can help
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
Dont find the converge in NACA0012 with structured mesh | ynos | OpenFOAM Running, Solving & CFD | 2 | December 14, 2013 06:03 |
ISAAC code mesh generation | morteza08 | Main CFD Forum | 0 | June 15, 2012 09:26 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
General questions on grid-based computing | Adrin Gharakhani | Main CFD Forum | 21 | June 5, 2000 13:47 |