|
[Sponsors] |
Less elements containing translational periodic Mesh with structured all Hex Mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 11, 2020, 14:13 |
Less elements containing translational periodic Mesh with structured all Hex Mesh
|
#1 |
Member
|
Hello Sir/Ma'am,
I'm bit of new to pointwise and worked on in only 5 times so far. I want to generate all hexahedral structured, translational periodic mesh with around 500,000 to 1,000,000 total elements/cells count. How can I do that? The CAE/solver environment is OpenFOAM 3D. I learned how to import the geometry then set the conditions as per CAE, and how to apply the translational periodic mesh at two opposite surfaces with identical elements and nodes count. Please help me in this situation. Thanks. Regards, Ash.K |
|
July 2, 2020, 09:44 |
|
#2 |
Member
|
Anyone,... out here,... who has some knowledge pointwise.
All I want to learn is how to make 500,000 max element count, all hexahedral structured mesh with identical face and node count on two opposite walls for periodicity (OpenFOAM: Cyclic faces). |
|
Tags |
structured mesh; periodic |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] What caused these low quality elements in the structured mesh? | amyliao | ANSYS | 0 | February 16, 2017 16:09 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[blockMesh] Blockmesh error - 2D scramjet | ishaninair | OpenFOAM Meshing & Mesh Conversion | 7 | March 18, 2011 00:14 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
unstructured vs. structured grids | Frank Muldoon | Main CFD Forum | 1 | January 5, 1999 10:09 |