|
[Sponsors] |
September 17, 2003, 03:11 |
VOF problem
|
#1 |
Guest
Posts: n/a
|
Hi,
I am using the VOF model with Star-CD v3150A.020 for a water/air simulation in a 10cm X 10cm 2D domain with grid size of 0.2cm. I am implementing a sloshing effect by oscillating the gravity vector from -45deg to 45deg (period 0.3s) using SORMOM.F. After about ~2 seconds, a layer of "misting" (10% water concentration) develops on top of the water surface, and does not decay. Therefore the interface is not clearly defined anymore. Due to the scale I am not using surface tension. Also, the time-step used is keeping the mean Courant number well below 1. The same effect is seen with a finer grid of 0.1cm cells, and also for some other VOF problems I am studying. Has anyone ever seen this problem before? Are there any techniques to minimize this misting? Can the VOF concentration be modified on an adhoc basis using SORSCA.F? Thanks. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
VOF diffuse problem on two fluids problem | Fang Jin | FLUENT | 5 | February 17, 2011 05:38 |
Problem in Modelling Heat Transfer Problem | Deepak R | FLUENT | 1 | December 6, 2007 09:37 |
Problem in cavity flow problem | saad | Main CFD Forum | 4 | November 1, 2007 07:45 |
natural convection problem for a CHT problem | Se-Hee | CFX | 2 | June 10, 2007 06:29 |
problem in solving "wave generation" problem | san | FLUENT | 2 | April 3, 2006 23:37 |