|
[Sponsors] |
January 16, 2009, 03:43 |
baffle and wall BC in v4.06
|
#1 |
Guest
Posts: n/a
|
Hi! I'm seeing strange results in a model with baffle and walls. One region set as adiabatic wall (region 0), another regions set as fixed temperature wall (483 K), in between is a adiabatic baffle. Further somewhere, there is an inlet velocity (343 K). The velocity vectors do not reach the wall because it is blocked by the baffle but somehow the wall surface temperature inside the blocked region become very hot! As if there is heat transfer from the hot wall to the blocked wall. There is no radiation set in this case. Any idea?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
what different between wall and baffle | tipakorn | Siemens | 5 | July 25, 2006 03:50 |
Subroutine and Baffle | yong | Siemens | 0 | October 28, 2004 08:45 |
Baffle problem.. | mohr76 | Siemens | 0 | July 14, 2004 07:37 |
baffle in use | guang ai | Siemens | 3 | November 10, 2003 04:51 |
porosity of baffle | raymond | Siemens | 4 | April 4, 2002 04:03 |