|
[Sponsors] |
May 4, 2012, 09:59 |
Propeller disc theory in Star CCM+
|
#1 |
New Member
Christian Rodriguez
Join Date: Jan 2012
Posts: 9
Rep Power: 14 |
Hey guys,
I am currently doing my master thesis in rotor aerodynamics for a small scaled helicopter. The first step before I include the main rotors in my mesh is to make a simplified verison of the model. My idea is to create a infinite thin disc over my helicopter body to simulate the flow of the rotor blade. The model will be simulated in a box which acts as a windtunnel (with a certain freestream velocity). Is there a easy way to model a disc in Star CCM+? I was wondering about this due to the fact that adding the disc will create a discontinuity in velocity and pressure around the rotor. Great forum btw //Christian |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem when imported geometry from 3D CAD to star ccm, | TAREK GANAT | STAR-CCM+ | 1 | May 21, 2013 22:15 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
error in star ccm | maurizio | Siemens | 3 | October 16, 2007 05:17 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |