|
[Sponsors] |
Monitor particle diameter and its frequency at a plane |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Join Date: Nov 2013
Posts: 1
Rep Power: 0 ![]() |
I am trying to monitor a particle distribution at a plane in a pipe, so I would like to plot particle diameter on the x axis and frequency on the y.
I can plot particle diameter, but which options should I select for frequency? And I also am currently plotting it for the whole pipe, not at a specific plane (I need to see how the distribution changes along the length of the pipe). Hopefully that makes sense! I am grateful for any assistance you can provide! |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
siamak rahimi ardkapan
Join Date: Jul 2010
Location: Copenhagen, Denmark
Posts: 220
Rep Power: 17 ![]() |
Do you want to see the distribution of particle diameters on a plane in a pipe? You can try plot/x-y and then change x and y axis to position and particle diameter. If you want to see particle diameter from a track file then you need to select diameter in lagrangian phase/track file/diameter.
__________________
Good luck Siamak |
|
![]() |
![]() |
![]() |
|
|