|
[Sponsors] |
Query Regarding entering the loading condition of vehicle in Star CCM |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Sidharth
Join Date: Sep 2015
Posts: 29
Rep Power: 10 ![]() |
Dear Experts,
I am working on a project of Under Hood Thermal Management on StarCCM software. I need to apply various loading conditions for the project. So wanted to know that, 1) If I want to test a vehicle at 240Km/h then where should I add this condition, is it at the inlet of the control volume, or anywhere else? 2) How to enter the gradients of the hill in the software? Thank you, Sidharth. |
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
importing ducted fan from catia to star ccm | Daniel4 | STAR-CCM+ | 0 | November 3, 2014 09:34 |
STAR CCM & WIN 8 pro | hyderkhan74 | STAR-CCM+ | 3 | March 5, 2014 04:56 |
STAR CCM+ Morphing Motion Boundary Condition - Plot | smorls | STAR-CCM+ | 0 | March 13, 2013 11:46 |
set up the boundary condition by using star ccm+ | layth | Siemens | 3 | February 12, 2013 08:34 |
Boundary Condition Query: Spinning Mesh | peter969 | CFX | 4 | May 9, 2011 08:10 |