|
[Sponsors] |
July 30, 2016, 07:19 |
Round bow
|
#1 |
New Member
Andrea
Join Date: Jul 2016
Posts: 25
Rep Power: 9 |
Greetings, originally the bow of the ship in this 2D simulation was round (radius 1 mm), but when I generate the trimmed mesh, star ccm+ modify the bow like in the attached pic. May anyone help me? I think the problem is in some wrong values in the mesh controls.
Thanks |
|
August 2, 2016, 06:09 |
|
#2 |
Senior Member
kevin alun
Join Date: Sep 2011
Location: Germany
Posts: 106
Rep Power: 14 |
One needs to look at the surface mesh, take a look at your initial surface and remeshed surface, make sure it has the rounding before going to a volume mesh.
If you have rounding use local surface controls, min. surface size, make a lower min of .1 or .25mm and check the remeshed surface |
|
August 3, 2016, 17:30 |
|
#3 |
New Member
Andrea
Join Date: Jul 2016
Posts: 25
Rep Power: 9 |
Thank you marmot! I solved my problem!
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Generate structured mesh for a 3D round surface | Anna Tian | ANSYS Meshing & Geometry | 3 | January 11, 2014 10:15 |
i want two models of ship with different bow | hussien mohamed hassan | Main CFD Forum | 0 | December 24, 2013 14:44 |
Two round jet modeling | shg74 | FLUENT | 0 | February 2, 2010 10:47 |
Meshing round orifice on physical wall | Dora | Main CFD Forum | 0 | August 28, 2006 17:10 |
Need the Condition for Particle and Bow Shock | Jun Sung Park | Main CFD Forum | 0 | October 13, 2000 04:01 |