Star ccm+ 12 version problem

Frikha · March 24, 2017, 08:01

Hello ,

I'm working on Star ccm+ 12 and ifinished my work so i send it to my supervisor who has the version 11

Is there any solution to save or convert my work using star ccm 12 and make t work on star ccm+11 ?

Thank you

Fiedde1887 · March 24, 2017, 10:14

You can Export the geometry and Import it to v11. That´s all you can do. After that you have to Change the Settings manually and run again.

Frikha · March 24, 2017, 13:22

Quote:

Originally Posted by Fiedde1887

You can Export the geometry and Import it to v11. That´s all you can do. After that you have to Change the Settings manually and run again.

ok , seems the only solution
thx

March 24, 2017, 08:01	Star ccm+ 12 version problem	#1
Frikha New Member uchiha madara Join Date: Jan 2017 Posts: 4 Rep Power: 9	Hello , I'm working on Star ccm+ 12 and ifinished my work so i send it to my supervisor who has the version 11 Is there any solution to save or convert my work using star ccm 12 and make t work on star ccm+11 ? Thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Star CCM 10 and 11 Launching Problem	CPuser	STAR-CCM+	0	September 29, 2016 21:57
problem OpenFOAM version incompatibility: going from 1.7.1 to 3.0.1	lyna	OpenFOAM Running, Solving & CFD	4	March 2, 2016 02:49
problem when imported geometry from 3D CAD to star ccm,	TAREK GANAT	STAR-CCM+	1	May 21, 2013 22:15
STAR CCM version 2.08.007	Chris184	STAR-CCM+	1	February 27, 2010 06:33
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 04:38

March 24, 2017, 10:14		#2
Fiedde1887 Member Nils Hennig Join Date: Apr 2015 Posts: 44 Rep Power: 11	You can Export the geometry and Import it to v11. That´s all you can do. After that you have to Change the Settings manually and run again.