Creating estg file for turbo wizard. -- CFD Online Discussion Forums

March 24, 2017, 14:54	Creating estg file for turbo wizard.	#1
Vashishtha New Member ritvik Join Date: Mar 2017 Posts: 4 Rep Power: 9	Hi, In the Star CCM+ Turbo wizard, there is an option to import blase geometry file in the estg format. I have a blade geometry with naca aerfoil sections. How do I write the estg file so that I can import the blade geometry in the turbo wizard? When I modified the estg file given in the compressible flow/ single row tutorial, with the coordinates of blade geometry I am using, I got the following error - 'ImportTurboBladeDialog:nOK():invalid inlet boundary file for blade row1' Thank you, Best Regards, Ritvik

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] funkyDoCalc with OF2.3 massflow	NiFl	OpenFOAM Community Contributions	14	November 25, 2020 03:30
polynomial BC	srv537	OpenFOAM Pre-Processing	4	December 3, 2016 09:07
[Other] How to use finite area method in official OpenFOAM 2.2.0?	Detian Liu	OpenFOAM Meshing & Mesh Conversion	4	November 3, 2015 03:04
[swak4Foam] Swak4FOAM 0.2.3 / OF2.2.x installation error	FerdiFuchs	OpenFOAM Community Contributions	27	April 16, 2014 15:14
friction forces icoFoam	ofslcm	OpenFOAM	3	April 7, 2012 10:57

All times are GMT -4. The time now is 02:29.