|
[Sponsors] |
March 24, 2017, 18:36 |
wind turbine CFD in Star CCM+
|
#1 |
New Member
Calum Mckenzie
Join Date: Mar 2017
Posts: 1
Rep Power: 0 |
Hi everyone,
I am trying to simulate a wind turbine in STAR CCM+ to gain results for thrust and power. I have used a Moving Reference Frame model for the simulation but am getting strange results when comparing to Blade Element Momentum Method. My inputs at the moment are wind speed in the velocity inlet of the domain boundary and a rotational speed associated to the moving reference frame. From the reports in STAR CCM+ I can see that it is possible to monitor thrust but cant monitor power. Could using one axial momentum theory for power equation be; P=0.5*density*V inlet*Area of turbine*(velcoty@turbine - Velocity exit)? |
|
March 26, 2017, 13:10 |
|
#2 |
Senior Member
Join Date: Nov 2010
Location: USA
Posts: 1,232
Rep Power: 24 |
You can make an expression report to monitor power. Just make a torque report and you already know the angular velocity.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFD of Vertical Axis Wind Turbine | shashankmechguy | FLUENT | 0 | June 1, 2014 21:47 |
Ducted wind turbine (BC for the shroud) | Pepita | CFX | 4 | June 29, 2013 07:09 |
Wind turbine simulation problem | sanchovg2 | STAR-CCM+ | 12 | March 5, 2013 04:18 |
State of the Art in CFD for wind turbine modeling | SET_WIND | Main CFD Forum | 0 | October 9, 2012 06:01 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |