|
[Sponsors] |
October 19, 2017, 23:58 |
Input part for automated mesh (2D)
|
#1 |
New Member
Reuben Buehler
Join Date: Oct 2017
Posts: 2
Rep Power: 0 |
I am constructing a 2D backward-facing step analysis. The part was created in 3D-CAD. I have created a "badge for 2D meshing" and the input part for this operation is the model domain. However, when I create the operation "automated mesh (2D)" and I go to select an input part the screen is blank and gives me no options to select. Any insight on what the problem might be?
P.S. The part has a surface that is orthogonal to the z-axis, the surface was created in the xy-plane and then extruded in the z-axis direction. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Mirror Mesh | Delete duplicate mesh | pythag0ra5 | ANSYS Meshing & Geometry | 6 | November 19, 2013 07:35 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |
[ICEM] How to mesh part by part? | rikio | ANSYS Meshing & Geometry | 6 | February 24, 2010 19:19 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |
How to control Minximum mesh space? | hung | FLUENT | 7 | April 18, 2005 09:38 |