|
[Sponsors] |
How to add source term onto the k and w equations in Star-ccm+ |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 13, 2020, 04:03 |
How to add source term onto the k and w equations in Star-ccm+
|
#1 |
New Member
Xinyi Miao
Join Date: Nov 2020
Posts: 1
Rep Power: 0 |
Hello, I am trying to use field function to add an additional source term Srans into the k and w equations.(as shown in the equations) The Source terms are to take account the extra bubble induced turbulence. It is two phase flow with Euler-Euler SST model.
I think the right way should be using field functions, but I don't know how can I incorporate my new filed functions into the iterations and calculations. Great thanks for any help you could give I have attached the equations. equationK.png equationW.png The equations are from Ma et al(2017)Direct numerical simulation–based Reynolds-averaged closure for bubble-induced turbulence,PHYSICAL REVIEW FLUIDS |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] Tabulated thermophysicalProperties library | chriss85 | OpenFOAM Community Contributions | 62 | October 2, 2022 03:50 |
[OpenFOAM.org] Error creating ParaView-4.1.0 OpenFOAM 2.3.0 | tlcoons | OpenFOAM Installation | 13 | April 20, 2016 17:34 |
[Other] How to use finite area method in official OpenFOAM 2.2.0? | Detian Liu | OpenFOAM Meshing & Mesh Conversion | 4 | November 3, 2015 03:04 |
[swak4Foam] swak4foam building problem | GGerber | OpenFOAM Community Contributions | 54 | April 24, 2015 16:02 |
Trouble compiling utilities using source-built OpenFOAM | Artur | OpenFOAM Programming & Development | 14 | October 29, 2013 10:59 |